savvycan

Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3

CAN DBC for 6th gen Mazda

A custom STM32-based CAN analyzer designed to capture, monitor, and analyze CAN bus data using SavvyCAN or any compatible PC software.

Qt plugin for the candleLight firmware compatible USB devices.

Can Sniffer is a lightweight application built on top of ObdMetrics that captures CAN bus traffic using Elm327 BT compatible adapters and saves it to a file. This data can later be read and visualized using SavvyCAN`

This project is an ELM CAN Bus Monitor that reads CAN bus data from a serial port and sends it over UDP.

FreeRTOS firmware for an STM32 bxCAN-to-USB adapter implementing the SLCAN (Lawicel) protocol and cellular UDP bridging.

CAN bus repeater/gateway/bridge with SLCAN sniffer using STM32/HAL.

CAN2USB converter/sniffer compatible with SavvyCAN (Lawicel SLCAN protocol) using STM32/HAL2.

Peugeot 207 IPC barebone demo using STM32/HAL and DBC file editor.

Standalone ESP-IDF SLCAN/LAWICEL bridge for ESP32-S3 using USB Serial/JTAG and classical CAN (TWAI)

GVRET Firmware for RE2350-CAN

CAN and CAN FD on macOS for PEAK PCAN-USB and Kvaser Leaf/USBcan/Hydra adapters. Pure user space over libusb: no kernel extension, no closed binaries, every channel of a multi-channel adapter. Ported from the vendors' own Linux drivers. PCAN-Basic compatible, so SavvyCAN and python-can work unchanged.

A shady 😏 little Python script to translate between a low-rent ELM327-command based device to SavvyCAN'a GVRET format via TCP